Basic Training for Model Engineers Part II

Building the "Polly" steam engine

We selected Tubal Cain's design for an oscillating steam engine as the basis for this course for a number of reasons.

It allows us to introduce you to a wide range of skills but each component is not too complicated.

Demonstrating turning

Only stock materials are used. This means that the materials (which you must buy yourself) are relatively cheap and the penalty for a mistake is not high. Incidentally all students learn that mistakes are inevitable, we all make them an learn from them.

The final result actually works - on the last day of the course you will be encouraged to raise steam and demonstrate the fruits of your labours (you can also impress your family when you get home).

We try to demonstrate as many of the techniques required as possible. After each day you will be given as "homework" the next stage of construction. You should complete this in your own workshop and we exchange experiences at the next session.

The beginning

After an introduction to the SM&EE and the practicalities of the course we discuss steam engines in general, and introduce the concepts behind oscillating engines such as "Polly".

The boiler

We discuss boiler construction, choice of materials and choice of solder/braze metals. The "Polly" boiler is silver soldered using copper with bronze fittings and flanged end plates. Skills covered include turning, thread tapping, flanging using a former and silver brazing.

The firebox

Constructed from sheet steel you can make this from scratch or we can supply a laser cut piece. Skills covered include sheet metal cutting, drilling and forming plus soft soldering.

The burner

The burner is made from sheet brass. Skills covered include tube forming, flanging, turning and silver brazing.

The base

Basically a shallow box made from sheet steel with a weight to stabilise the model when running. Skills covered include sheet metal bending, soft soldering.

Boiler Fittings and Safety Valve

A student tries flanging

You may choose to purchase these items but there is much to learn from making them. Skills covered include turning small components, thread cutting with taps and dies, spring making.

Engine Stand

Constructed from sheet steel and brass this supports the crankshaft and cylinder of the engine itself. It will be bolted to the firebox in the finished engine. Skills covered include sheet metal bending, turning, accurate marking out and drilling. One part requires milling or filing.

Cylinder Piston and Crankshaft

By now most of the required skills have been learned but the cylinder and piston must be made accurately if they are to work well. Skills covered include boring, lapping and the use of adhesives.

Painting and Finishing

Many engineers dislike painting their models and many spoil their work in consequence. We give discuss the process of painting, which paints to use and why the work (or not).

Application

To apply for a course or membership of SM&EE go here.

The next course will start on Saturday 13th December 2008.